webnews

If you've got a pool and it's not doing what it should, there are a few things that might be going on. The first thing to do is rule out the obvious. You can generally do this by running through the following checklist before calling pool pump repairs Melbourne expert to handle:

Rule Out the Obvious

The first thing you should do before calling pool pump repairs Melbourne professional is check the obvious. Make sure the power is on, and that the pump is plugged in. If it won't run, make sure it's not blocked by debris. In addition, make sure that water is flowing through your filter basket (you may need to clean out dead leaves or other debris).

If none of these steps work, call a pool professional!

Make Sure the Pump is Getting Power

Make sure the breaker is not tripped. If you have an older model pool pump, it may be wired to a separate circuit than other electrical components in your home. You can check this by flipping off the circuit breaker that powers your pool pump, then flipping on the breakers for all other rooms in the house and seeing which one stays off when you flip it on again.

If it doesn't come back on right away, then there's a problem with your breaker or wiring somewhere else in your house and you'll need to call an electrician for help.

Check that nothing has happened to interrupt how much light shines through inside each room through windows/doors onto lamps etc., as well as whether power is available at all outlets throughout different areas of your home before calling someone out just yet...

Check for Debris in the Hoses

Check for debris in the pool. The first thing you should do is make sure that there is no debris floating on top of the water, which can clog up your filter. If you see any leaves or other objects floating in the pool, skim them out with a net before calling a professional to fix your pump.

Check for debris in the skimmer baskets and pump basket. If there are leaves or other objects trapped between your skimmers and pumps, they may be preventing water from being sucked through those areas into the filter system and pool lines.

Make sure that the pump is plugged in and turned on

Before calling pool pump repairs Melbourne professional for help with your pool pump repair, make sure that the pump is plugged in and turned on.

If it's not plugged in, you can check the power switch by first unplugging the pump from its power source, then plugging it back in again. If this doesn't work, try checking the breaker box or circuit breaker for possible tripped breakers or fuses.

Check the skimmer baskets and make sure they're not full

First, check the skimmer baskets. If they're full, clean them out. You can do this by taking the basket off of its hinges and emptying it into a large garbage bag or bucket.

If there is no blockage in the skimmer baskets, you'll want to make sure that there isn't any debris from leaves or other small items floating on top of your pool water.

Make sure the filter is clean and has adequate pressure

If you have a filter on your pool, you will want to make sure that it is clean and functioning properly. If there is any debris in the filter, this could clog up the pump and cause it to stop working or even break down. This can be avoided by cleaning out all of the debris from the pool filter regularly.

Another thing you may want to check is the pressure gauge on your pump. This will tell you if there are any leaks in your system that need attention before we come out for service calls or repairs on your water heater or pool heater. If there is no pressure, check to see if the pump has power and isn't just shut off (this happens frequently).

Conclusion

After you’ve checked all these things, if the pump still isn’t working, then it is time to call a professional. If you don’t know who to call, we can help! Give us a call and we will give you our best price on pool pump repair services and get your pool back up and running in no time at all!

Source: What to Do Before Calling a Pool Professional for Pool Pump Repair?